Expert Answers about Ford F-250 Super Duty

• Available Types of Suspension Enhancement Kits for 2016 Ford F-250 Super Duty
• Although RoadActive does not offer an active suspension kit like # RAS2611-V for your 2016 Ford F-250 Super Duty we do have many options in both front- and rear-axle suspension enhancement kits that include jounce spring, air bag and leaf spring products. The best one for you will depend on your specific needs and budget. Jounce springs like the Timbren kit # TFR250SDG are relatively cost-effective, simple to install (no drilling), maintenance-free and they provide independent progressive...
  view full answer...


• Single E-Bike Bike Rack Needed for a 63 lb Rad Mini
• The Hollywood Racks Sport Rider SE # HLY74FR only comes in a 2-bike version but I believe a 2 bike version will be necessary to get the 63 pound capacity that you need. Since you are concerned about lifting your bike, I highly recommend the Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount # TH903202. The Easyfold has a built in ramp to easily load your bikes. This rack has the 65 pound weight capacity that you will need and can accommodate tires...
  view full answer...


• Front Mount Hitch for 2021 Ford F-250 Super Duty
• Congrats on the new truck, we have two options for your 2021 Ford F-250 Super Duty with the 7.3 gas, the Draw Tite, # 65076 and the Curt, # C31078. Each option having equal specs of 9K line pull and a vertical load of 500 lbs. with a receiver opening of 2"x2" using a 5/8" pin. The primary difference is that the Curt, my preferred option, sets closer to the air dam while the Draw-Tite will set out from the front a little further and the Curt is made in the USA. Each being a fully welded...
  view full answer...


• Weight Distribution Hitches Capable of a 4-1/2" Drop With Included Drop Shank
• We have the Blue Ox TrackPro Weight Distribution Systems that offer up to 4-1/2" of drop with their 9 hole shank. You will need to match the hitch to the weight capacity of your trailer. Blue Ox TrackPro Weight Distribution # BLU67FR 600-800lbs tongue weight, 8,000lbs maximum trailer weight Blue Ox TrackPro Weight Distribution # BLU87FR 800-1,000lbs tongue weight, 10,000lbs maximum trailer weight Blue Ox TrackPro Weight Distribution # BLU59FR 1,000-1,300lbs tongue weight, 13,000lbs maximum...
  view full answer...


• Availability of B and W Turnoverball Rail Kit that Fits 2005 Ford F-250 Short Bed
• Yes, we do offer the B and W Turnoverball Gooseneck Install kit part # BWGNRM1111 that you are looking for. With that said the correct rail kit for a 2005 Ford F-250 short bed is the part # BWGNRM1108 so that would be the kit you'd want.
  view full answer...


• Availability of Firestone All-In-One Analog Rear Kit for 2018 Ford F-250 4WD
• Although we do not have the complete kit you saw on the Firestone website, the individual components are available. For the air bags for your 2018 Ford F-250 4WD, you need the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F35FV. This comes with two air springs and everything you need to get them installed. The other piece of that kit is the air compressor. I reached out to Firestone and found that the analog kit uses a standard duty compressor like the Firestone...
  view full answer...


• Does Torklift Hitch # TLF1002 Fit 4WD and 2WD Versions of 2011 Ford F-250
• The Torklift hitch part # TLF1002 fits both 2WD and 4WD versions of the 2011 Ford F-250 that you have so either way it does fit.
  view full answer...


• Curt Rebellion XD Shock Absorbing Ball Mount With 2-1/2" Hitch
• The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount # C57UR is the only one currently in production that fits a 2-1/2" receiver. It has a 2" and 2-5/16" ball mount that can be flipped depending on your application. The hitch is height adjustable from an 8" drop up to a 1" rise, in 1" increments. You can not flip the hitch portion as it must be in the drop position for the shock absorber to work properly. The Lock Set # C78CR provides you with a locking stainless steel hitch receiver...
  view full answer...


• Availability of the Pullrite Superlite 20k Fifth-Wheel Hitches
• While we do not carry the Pullrite Superlite 20k 5th-wheel hitches, we do have some great B&W Companion models that provide you with a 20k capacity you need. For that route, I recommend these options depending on what setup you have on your 2022 Ford F-250 Super Duty: - B&W Companion 20k # BWRVK3400-5W with Installation Kit # BWGNRK1116-5W (for 6-3/4' bed without OEM prep) - B&W Companion 20k # BWRVK3500-5W with Installation Kit # BWGNRK1116-5W (for 8' bed without OEM prep) - B&W Companion...
  view full answer...


• Options for Adding Ford OEM Equivalent Puck System to 2014 Ford F-250 Super Duty
• Yes, you can add the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel and Gooseneck Trailer Hitches, # RP30126, along with the optional part number # RP30138 if you want to include the Gooseneck Hitch connection; this will be the relative equivalent of your 2014 Ford F-250 Super Duty being delivered from the factory with OEM puck system installed. (This fits 2011 - 2016 Ford F-250 or F-350 Super Duty Trucks.) This installation will allow you to use any 5th wheel hitch...
  view full answer...


• B&W Underbed Installation Kit for Companion 5th Wheel Hitch in 2017 Ford F-250 4WD 6-3/4-Ft Bed
• Part # BWGNRK1116 is the Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitch # BWRVK3400-5W to install it in your 2017 Ford F-250 Super Duty 4WD - 6-3/4 Foot Bed without the factory rail kit. This same install kit also fits the long bed version without the factory rail kit.
  view full answer...


• Availability of the Master Lock Pivot Lock Hitch Pin for a 2-1/2 inch Hitch Receiver
• Although we do have hitch pins that are compatible with 2-1/2 inch hitch receivers, the Master Lock Pivot Lock Hitch Pin, like part # ML1495DAT, is only available for 2 inch hitches. If your concern is that you will lose the clip with a standard pin and clip like part # PC3 then I have a recommendation for you. I recommend using a locking hitch pin, like part # TR63253, which has a bulky lock in the place of a clip. Not only will it be easier to find on the ground if you dropped it,...
  view full answer...


• Are There 2-1/2" Receiver Tube Shanks With 5 Or 7 Holes Available
• We carry a large selection of shanks that fit a 2-1/2" receiver, like the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop # EQ90-02-4900, but the amount of holes isn't always going to mean it has a large enough drop or rise since the holes could sit different in the shank. I've attached a link to all of the shanks that fit a 2-1/2" receiver but I'd be happy to find you the correct fit if you could tell me which weight distribution hitch you're needing it for and the drop...
  view full answer...


• Firestone Air Bag Kit Recommendation for 2017 Ford F-250
• The Firestone kit part # F2355 is designed to fit newer Nissan Titans but would not fit your 2017 Ford F-250. Your best option though would be to sell the kit you have on eBay or list in on a Nissan forum as you'll most likely be able to get most of your money back out of it and then will be able to buy the part # F2600 which is a fit for your new truck and the cost will be offset the most. The replacement brackets for Firestone bags will add up quick and it will make more sense to go...
  view full answer...


• Availability of Third Brake Light Camera for 2014 Ford F-250 FX4 Lariat
• All of our third brake light cameras for your 2014 F-250 can be found under truck cameras on the custom fit page for your truck. I have also added that link below. If you have a factory monitor you need one of the following based on the monitor size: -Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision # 3460025 -Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision # 3460006 If you do not have the factory monitor you could use the # 3460008 which...
  view full answer...


• Recommended Air Bags for 2020 Ford F-250
• Yes; there are a number of kits available for your 2020 Ford F-250 Super Duty truck with a lift kit. I recommend using the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle # AL26KV because the internal jounce bumpers help improve ride comfort, reduce sway, and help with cornering even at lower air pressure. I also really like that Air Lift has a brand exclusive upper and lower roll plate to help protect air springs from damage and ultimately...
  view full answer...


• Can Older Thule Square Bars Be Used On Retrax Tonneau Cover?
• You will want a new roof rack for your Retrax tonneau cover because there are not any feet available to fit your older Thule square bars onto the Retrax cover. I'm sure this is not the news you were wanting to hear, but I will give you an excellent recommendation in case you decide to purchase a new setup. I recommend the popular Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - Black - 71" # RRVA180B-RRRLT600. The crossbars are 71" long and...
  view full answer...


• Fixed and Folding Hitch Steps for 2-Inch Hitch on 2017 Ford F-250
• Extendable Hitch Mounted Step # 288-08400 is not designed for use in the sideways stowed position. The step's design means it needs to be in the extended position for use so that the strongest part of the main structure is there to support the load on it. For a fixed hitch step that will not stick out too far you might consider the Pilot # BBS-1102 or one of the others shown on the linked page. We also have fold-up step # CARR190011B from Carr which is rated for 500-lbs and which is 14...
  view full answer...


• Storage Totes/Dividers For Yakima GearLocker EXO Enclosed Cargo Carrier
• Yes, we have the GearTotes # Y64VR that you can use in the Yakima GearLocker Enclosed Cargo Carrier # Y44VR. These totes are 13" long, 17-1/2" wide, and 9" tall and have a removable divider for smaller objects. Each tote has a 50lb capacity with sewn-in handles allow you to more easily transport your cargo.
  view full answer...


• Availability of a Cover for the 18K Demco Hijacker Autoslide 5th Wheel Hitch
• I do have a solution for you to protect the 18K Autosliding Hitch like part # DM8550034 from Demco but unfortunately there are no covers that will fit over the entire hitch, just the part # DM14844 that fits over the head unit. We have a wide variety of tonneau covers that you can install on your pickup to help protect your Hijacker from the elements. If your pickup is the 2018 Ford F-250 then I recommend going with the BAK Revolver X2 # BAK39330 or the RetraxONE MX # RT60383. Both are...
  view full answer...